The preparation work before the drawing and reed operation of the metal net weaving machine

1. Material selection:

Select suitable healds, remove defective ones and ensure flatness.

Receive qualified reeds and check the specifications with the requirements of the task order.

2. Equipment setup:

Install heald frames to ensure stability and avoid inversion.

Adjust the warp wires to ensure even tension.

Install the stranding bar, choose the suitable position to ensure stability.

3. Warp wires handling:

Unravel the warp wires, group them according to the specified lengths and pull them tight with the pressure weight.

Release sufficient length of warp wires and adjust the position of stranding.

4. Reed preparation:

Check the cleanliness of the reed and find the jamming point.

Use kraft paper to wrap the reed to protect the surface.

5. Safety Notes:

Wear protective equipment and keep the working area tidy.Observe operating procedures to ensure safety.