Adjustment of the opening mechanism (preliminary adjustment before starting the machine)

1. Adjust the pedal rod pins of the pedal heald rod to the same height position. The pedal lever pin is adjusted to the optimum height position, and the installation position of the pedal lever pin is determined by the requirement of generally making the pedal lever in a horizontal position. Back not left type participation

2. Check that the mounting position of the pedal heald rod holder is correct. Requirements:  Also to raw す chapter each however

(1) The mounting position of the two treadle bar holders on the weaving machine must be in a straight line, i.e. the front and rear mounting positions must be identical.

(2) The same treadle harness seat must not be tilted when mounted on the front cross bottom plate of the weaving machine.

(3) The optimum position for the mounting of the pedal heald bar; the pedal heald bar (angle bar) is vertically vertical and horizontally horizontal when the doup is in the flush position.